Nástroj pro pěstování v interiéru

Kalkulačka pěstebního světla

Vypočítejte doporučený výkon pěstebního světla, cílové PPFD, počet svítidel a DLI pro hydroponii, grow boxy a interiérové zahrady.

Enter the size of your grow space floor area.

Choose square meters or square feet.

Different growth stages need different light intensity.

Enter your current fixture wattage to estimate how many lights you need.

Recommended total wattage 420 W
Based on area and growth stage
Suggested PPFD 500 µmol/m²/s
Estimated fixture count 2 lights
Suggested hanging height 35–50 cm

Recommended grow light products

LED pěstební světlo

Vhodné svítidlo pro toto pěstební uspořádání s vyváženým výkonem pro pokrytí koruny a efektivní vnitřní pěstování.

Length of the grow area.

Width of the grow area.

Choose meters or feet.

Sets target PPFD range.

Typical efficient LED fixtures are often in the 2.3–3.1 µmol/J range.

Used to estimate how many fixtures are needed.

Accounts for real-world losses from fixture spread, height, and room conditions.

Needed for DLI estimation from your target PPFD.

Estimated total fixture wattage 314 W
Estimated from target PPFD, efficacy, and real-world coverage factor
Target PPFD 500 µmol/m²/s
Estimated PPF needed 850 µmol/s
Estimated fixture count 1 light
Estimated DLI 32.4 mol/m²/day

Recommended fixtures for this setup

LED pěstební světlo

Vhodné svítidlo pro toto pěstební uspořádání s vyváženým výkonem pro pokrytí koruny a efektivní vnitřní pěstování.

Average PPFD at canopy level in µmol/m²/s.

How many hours the lights are on per day.

Used to compare your DLI with typical stage targets.

Daily Light Integral 32.4 mol/m²/day
Calculated from your PPFD and daily light hours
Typical target range 20–35 mol/m²/day
Status Within range
Suggested next step Maintain current intensity

Products to optimize lighting

LED pěstební světlo

Vhodné svítidlo pro toto pěstební uspořádání s vyváženým výkonem pro pokrytí koruny a efektivní vnitřní pěstování.

Grow light calculator for hydroponics and indoor growing

This grow light calculator helps indoor growers estimate the right LED grow light wattage, fixture count, target PPFD, and daily light integral for tents, grow rooms, hydroponic systems, and indoor gardens. It is useful for seedlings, vegetative growth, flowering plants, fruiting crops, and general indoor cultivation.

Use the calculator to estimate how much light your grow area needs, compare fixture sizes, and plan more efficient lighting coverage for better canopy development and more consistent plant growth.

How this grow light calculator works

The calculator estimates lighting needs based on grow area and plant stage. In advanced mode, it also uses fixture efficacy and a real-world coverage factor to estimate how much total light output and wattage are needed for your space.

Required PPF ≈ Target PPFD × Grow Area
Estimated Wattage ≈ Required PPF ÷ Fixture Efficacy

Because real grow rooms are not perfect, the coverage factor adjusts for losses caused by hanging height, spread, layout, and room conditions.

What each parameter means

  • Grow area: total canopy floor area that needs light coverage.
  • Plant stage: growth phase, which changes target light intensity.
  • PPFD: photosynthetic photon flux density at canopy level.
  • PPF: total light output of the fixture in µmol/s.
  • Fixture efficacy: how efficiently a grow light converts watts into usable photons.
  • Coverage factor: practical adjustment for real-world lighting losses.
  • DLI: total usable light plants receive per day.
  • Light hours per day: photoperiod used to calculate DLI.

Typical target PPFD by growth stage

  • Seedling / clone: gentle light levels, typically around 100–300 µmol/m²/s.
  • Vegetative stage: moderate light levels, typically around 300–600 µmol/m²/s.
  • Flowering / fruiting: stronger light levels, typically around 600–900 µmol/m²/s.

These are practical general-use targets. Final intensity depends on crop type, cultivar, environment, CO₂ level, fixture design, and grower strategy.

How to calculate DLI

The DLI formula is:

DLI = PPFD × 3600 × light hours ÷ 1,000,000

DLI helps growers understand the total daily light plants receive, not just momentary light intensity. This is useful when comparing different photoperiods, dimming strategies, and growth stages.

Best practice for indoor growers

  1. Match light intensity to plant stage.
  2. Keep fixture height consistent across the canopy.
  3. Use DLI, not only wattage, when evaluating lighting strategy.
  4. Check real canopy PPFD with a PAR meter if possible.
  5. Combine strong lighting with proper climate, nutrients, irrigation, and airflow.
Doprava. 3denní doručení do EU

7 až 15 EUR do 30 kg. Více informací na stránce Podrobnosti o dopravě.

60denní vrácení zboží

Můžete získat vrácení peněz nebo výměnu až do 30 dnů od nákupu.

Obvykle stojíme na straně zákazníků, takže můžeme dát 60denní lhůtu!

2měsíční odborná podpora po prodeji

Je to zdarma.

Jsme tým 10 lidí s desetiletou moudrou zkušeností v pěstování a zahradničení, takže pokud budete cokoli potřebovat, dovedeme vás k cíli do 2 měsíců od nákupu.

Jak nás kontaktovat?

Napište nám prostřednictvím:

Chat přes E-mail

Chat na WhatsApp

Online chat - v pravém dolním rohu jakékoli stránky tohoto webu.

O nás. Naše 9letá historie

GoToGarden vznikl v roce 2017 z osobní frustrace. Náš zakladatel byl hobby pěstitel, který trávil hodiny procházením online obchodů, které působily, jako by je postavili lidé, kteří se nikdy nedotkli rostliny — neuspořádané rozvržení, vágní popisy produktů, žádné skutečné pokyny, co si vlastně koupit nebo proč. Věděl, že musí existovat lepší způsob.

Více informací na stránce O nás

Podívejte se na další kalkulačky!

Odhadněte živiny, osvětlení, VPD, zavlažování, rozestupy rostlin, plánování pěstování atd.

Jiné nástroje

Chatujte s námi, jsme online

Chat na WhatsApp

Chat přes E-mail