Werkzeug für den Innenanbau
Wachstumslicht-Rechner
Berechnen Sie die empfohlene Wattzahl der Wachstumsleuchte, die Ziel-PPFD, die Anzahl der Leuchten und die DLI für Hydrokultur, Growzelte und Innenbereiche.
Enter the size of your grow space floor area.
Choose square meters or square feet.
Different growth stages need different light intensity.
Enter your current fixture wattage to estimate how many lights you need.
Recommended grow light products
LED-Wachstumslicht
Eine geeignete Leuchte für dieses Anbausetup, mit ausgewogenem Output für die Ausleuchtung des Blätterdachs und effizienten Indoor-Anbau.
Length of the grow area.
Width of the grow area.
Choose meters or feet.
Sets target PPFD range.
Typical efficient LED fixtures are often in the 2.3–3.1 µmol/J range.
Used to estimate how many fixtures are needed.
Accounts for real-world losses from fixture spread, height, and room conditions.
Needed for DLI estimation from your target PPFD.
Recommended fixtures for this setup
LED-Wachstumslicht
Eine geeignete Leuchte für dieses Anbausetup, mit ausgewogenem Output für die Ausleuchtung des Blätterdachs und effizienten Indoor-Anbau.
Average PPFD at canopy level in µmol/m²/s.
How many hours the lights are on per day.
Used to compare your DLI with typical stage targets.
Products to optimize lighting
LED-Wachstumslicht
Eine geeignete Leuchte für dieses Anbausetup, mit ausgewogenem Output für die Ausleuchtung des Blätterdachs und effizienten Indoor-Anbau.
Grow light calculator for hydroponics and indoor growing
This grow light calculator helps indoor growers estimate the right LED grow light wattage, fixture count, target PPFD, and daily light integral for tents, grow rooms, hydroponic systems, and indoor gardens. It is useful for seedlings, vegetative growth, flowering plants, fruiting crops, and general indoor cultivation.
Use the calculator to estimate how much light your grow area needs, compare fixture sizes, and plan more efficient lighting coverage for better canopy development and more consistent plant growth.
How this grow light calculator works
The calculator estimates lighting needs based on grow area and plant stage. In advanced mode, it also uses fixture efficacy and a real-world coverage factor to estimate how much total light output and wattage are needed for your space.
Because real grow rooms are not perfect, the coverage factor adjusts for losses caused by hanging height, spread, layout, and room conditions.
What each parameter means
- Grow area: total canopy floor area that needs light coverage.
- Plant stage: growth phase, which changes target light intensity.
- PPFD: photosynthetic photon flux density at canopy level.
- PPF: total light output of the fixture in µmol/s.
- Fixture efficacy: how efficiently a grow light converts watts into usable photons.
- Coverage factor: practical adjustment for real-world lighting losses.
- DLI: total usable light plants receive per day.
- Light hours per day: photoperiod used to calculate DLI.
Typical target PPFD by growth stage
- Seedling / clone: gentle light levels, typically around 100–300 µmol/m²/s.
- Vegetative stage: moderate light levels, typically around 300–600 µmol/m²/s.
- Flowering / fruiting: stronger light levels, typically around 600–900 µmol/m²/s.
These are practical general-use targets. Final intensity depends on crop type, cultivar, environment, CO₂ level, fixture design, and grower strategy.
How to calculate DLI
The DLI formula is:
DLI helps growers understand the total daily light plants receive, not just momentary light intensity. This is useful when comparing different photoperiods, dimming strategies, and growth stages.
Best practice for indoor growers
- Match light intensity to plant stage.
- Keep fixture height consistent across the canopy.
- Use DLI, not only wattage, when evaluating lighting strategy.
- Check real canopy PPFD with a PAR meter if possible.
- Combine strong lighting with proper climate, nutrients, irrigation, and airflow.
Versand. 3 Tage EU-Lieferung
7 bis 15 EUR unter 30kg. Mehr erfahren auf der Versanddetails Seite.
60 Tage Rückgabe
Sie können bis zu 30 Tage nach dem Kauf eine Rückerstattung oder einen Ersatz erhalten.
Wir stehen jedoch in der Regel auf der Seite unserer Kunden, daher können wir einen Zeitrahmen von 60 Tagen gewähren!
2 Monate Experteneinsatz nach dem Kauf
Es ist kostenlos.
Wir sind ein 10-köpfiges Team mit einem Jahrzehnt erfahrener Erfahrung im Anbau und Gartenbau. Wenn Sie Hilfe benötigen, werden wir Sie innerhalb von 2 Monaten nach dem Kauf zu Ihrem Ziel führen.
Über uns. Unsere 9-jährige Geschichte
GoToGarden wurde 2017 aus persönlicher Frustration heraus gegründet. Unser Gründer war ein Hobbyzüchter, der stundenlang Online-Shops durchsuchte, die sich anfühlten, als wären sie von Leuten gebaut worden, die noch nie eine Pflanze angefasst hatten – überladene Layouts, vage Produktbeschreibungen, keine wirkliche Anleitung, was man kaufen sollte oder warum. Er wusste, dass es einen besseren Weg geben musste.
Mehr erfahren auf der Über uns Seite
Entdecke andere Rechner!
Schätze Nährstoffe, Beleuchtung, VPD, Bewässerung, Pflanzabstand, Anbauplanung usw.