Herramienta de control climático

Calculadora de VPD

Calcula la presión de vapor de déficit a partir de la temperatura y la humedad para el control climático en hidroponía, cultivo interior, carpas de cultivo e invernaderos.

Current room or canopy air temperature.

Choose Celsius or Fahrenheit.

Current relative humidity in the grow space.

Used to compare your result with typical stage targets.

Calculated VPD 1.33 kPa
Calculated from air temperature and relative humidity
Stage target range 0.8–1.2 kPa
Status Slightly high
Suggested action Raise humidity slightly

Recommended products for climate control

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

Air temperature in the grow room.

Choose Celsius or Fahrenheit.

Relative humidity percentage.

Leaf temperature minus air temperature. Negative means leaves are cooler than the air.

Used for stage comparison.

Night conditions often run a lower target than daytime.

Leaf-based VPD 1.18 kPa
Calculated from leaf temperature, air humidity, and saturation vapor pressure
Leaf temperature 25 °C
Target range 0.8–1.2 kPa
Status Within range
Suggested action Maintain current climate

Advanced mode is more practical because plant leaves are often slightly cooler or warmer than the surrounding air. Using leaf temperature can give a more realistic VPD value than air temperature alone.

Recommended products for VPD management

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

Air temperature in your canopy zone.

Choose Celsius or Fahrenheit.

Difference between leaf temperature and air temperature.

Current relative humidity percentage.

Used for target comparison.

Estimated leaf temperature 24.5 °C
Leaf temperature estimate based on your selected air temp and offset
Leaf-based VPD 0.91 kPa
Target range 0.4–0.8 kPa
Suggested action Raise humidity a little

Recommended products for leaf-temperature-driven climate tuning

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

Producto de control climático

Un producto útil para el control de la humedad, el flujo de aire, la monitorización o la gestión de la temperatura.

VPD calculator for hydroponics and indoor growing

This VPD calculator helps growers estimate vapor pressure deficit from temperature and relative humidity so they can manage climate more effectively in hydroponics, indoor growing, greenhouse production, and grow tent environments. It is useful for seedlings, clones, vegetative growth, and flowering plants where climate control directly affects transpiration and plant performance.

The tool includes a simple VPD calculator, an advanced leaf-temperature-based mode, and a leaf temperature helper so growers can tune humidity and temperature with more confidence.

How this VPD calculator works

VPD is the difference between how much moisture the air can hold at a given temperature and how much moisture is actually present. Higher VPD usually means drier air and stronger transpiration demand. Lower VPD usually means more humid air and lower transpiration demand.

SVP = 0.6108 × e^(17.27 × T ÷ (T + 237.3))
VPD = saturation vapor pressure × (1 − RH ÷ 100)

In advanced mode, the calculation uses estimated leaf temperature instead of only air temperature, which often gives a more realistic result for practical growing.

What each parameter means

  • Air temperature: ambient temperature around the plant canopy.
  • Relative humidity: percentage of moisture currently present in the air.
  • Leaf temp offset: difference between leaf temperature and air temperature.
  • Leaf temperature: actual or estimated temperature of the plant leaf surface.
  • VPD: vapor pressure deficit, shown in kPa.
  • Plant stage: growth phase used to compare against practical target ranges.

Why VPD matters for growers

VPD affects transpiration, water movement, nutrient transport, stomatal behavior, and plant stress. If VPD is too low, the air may be too humid and transpiration may slow. If VPD is too high, plants may lose moisture too quickly and become stressed.

Managing VPD can help growers make better decisions about humidity, extraction, air movement, temperature, and irrigation strategy.

Typical practical VPD targets

  • Clone / seedling: around 0.4–0.8 kPa
  • Vegetative stage: around 0.8–1.2 kPa
  • Flowering stage: around 1.0–1.5 kPa

These are general-use reference ranges for planning. Final targets depend on crop type, airflow, lighting intensity, CO₂ level, irrigation style, and overall climate strategy.

Best practice for indoor growers

  1. Use VPD together with temperature, humidity, and irrigation monitoring.
  2. Check leaf temperature when possible, not only room temperature.
  3. Do not chase one exact VPD number at all times; work within a practical range.
  4. Adjust humidity and temperature gradually to avoid plant stress.
  5. Review VPD together with plant stage, lighting intensity, and airflow conditions.
Envío. 3 días de entrega en la UE

7 a 15 EUR por menos de 30 kg. Más información en la página de Detalles de envío.

60 días de devoluciones

Puedes obtener un reembolso o reemplazo hasta 30 días después de la compra.

Pero normalmente estamos del lado del cliente, ¡así que podemos dar un plazo de 60 días!

2 meses de soporte experto postventa

Es gratis.

Somos un equipo de 10 con una década de sabia experiencia en cultivo y jardinería, así que si necesitas ayuda, te guiaremos hasta tu objetivo en un plazo de 2 meses desde la compra.

¿Cómo contactarnos?

Escríbenos por:

Chat por Email

Chat por WhatsApp

Chat en línea: en la esquina inferior derecha de cualquier página de este sitio web.

Sobre nosotros. Nuestra historia de 9 años

GoToGarden comenzó en 2017 por frustración personal. Nuestro fundador era un cultivador aficionado que pasaba horas navegando por tiendas en línea que parecían construidas por personas que nunca habían tocado una planta: diseños desordenados, descripciones de productos vagas, sin una guía real sobre qué comprar o por qué. Sabía que tenía que haber una manera mejor.

Más información en la página de Sobre nosotros .

¡Consulta otras calculadoras!

Estima nutrientes, iluminación, VPD, riego, espaciado de plantas, planificación de cultivos, etc.

Otras herramientas

Chatea con nosotros, estamos en línea

Chat por WhatsApp

Chat por Email