Strumento per coltivazione indoor
Calcolatore Luce di Coltivazione
Calcola il wattaggio raccomandato per la luce di coltivazione, il PPFD target, il numero di lampade e il DLI per idroponica, grow tent e giardini indoor.
Enter the size of your grow space floor area.
Choose square meters or square feet.
Different growth stages need different light intensity.
Enter your current fixture wattage to estimate how many lights you need.
Recommended grow light products
Luce LED di coltivazione
Un apparecchio adatto per questo setup di coltivazione, con un'emissione bilanciata per la copertura della chioma e una coltivazione indoor efficiente.
Length of the grow area.
Width of the grow area.
Choose meters or feet.
Sets target PPFD range.
Typical efficient LED fixtures are often in the 2.3–3.1 µmol/J range.
Used to estimate how many fixtures are needed.
Accounts for real-world losses from fixture spread, height, and room conditions.
Needed for DLI estimation from your target PPFD.
Recommended fixtures for this setup
Luce LED di coltivazione
Un apparecchio adatto per questo setup di coltivazione, con un'emissione bilanciata per la copertura della chioma e una coltivazione indoor efficiente.
Average PPFD at canopy level in µmol/m²/s.
How many hours the lights are on per day.
Used to compare your DLI with typical stage targets.
Products to optimize lighting
Luce LED di coltivazione
Un apparecchio adatto per questo setup di coltivazione, con un'emissione bilanciata per la copertura della chioma e una coltivazione indoor efficiente.
Grow light calculator for hydroponics and indoor growing
This grow light calculator helps indoor growers estimate the right LED grow light wattage, fixture count, target PPFD, and daily light integral for tents, grow rooms, hydroponic systems, and indoor gardens. It is useful for seedlings, vegetative growth, flowering plants, fruiting crops, and general indoor cultivation.
Use the calculator to estimate how much light your grow area needs, compare fixture sizes, and plan more efficient lighting coverage for better canopy development and more consistent plant growth.
How this grow light calculator works
The calculator estimates lighting needs based on grow area and plant stage. In advanced mode, it also uses fixture efficacy and a real-world coverage factor to estimate how much total light output and wattage are needed for your space.
Because real grow rooms are not perfect, the coverage factor adjusts for losses caused by hanging height, spread, layout, and room conditions.
What each parameter means
- Grow area: total canopy floor area that needs light coverage.
- Plant stage: growth phase, which changes target light intensity.
- PPFD: photosynthetic photon flux density at canopy level.
- PPF: total light output of the fixture in µmol/s.
- Fixture efficacy: how efficiently a grow light converts watts into usable photons.
- Coverage factor: practical adjustment for real-world lighting losses.
- DLI: total usable light plants receive per day.
- Light hours per day: photoperiod used to calculate DLI.
Typical target PPFD by growth stage
- Seedling / clone: gentle light levels, typically around 100–300 µmol/m²/s.
- Vegetative stage: moderate light levels, typically around 300–600 µmol/m²/s.
- Flowering / fruiting: stronger light levels, typically around 600–900 µmol/m²/s.
These are practical general-use targets. Final intensity depends on crop type, cultivar, environment, CO₂ level, fixture design, and grower strategy.
How to calculate DLI
The DLI formula is:
DLI helps growers understand the total daily light plants receive, not just momentary light intensity. This is useful when comparing different photoperiods, dimming strategies, and growth stages.
Best practice for indoor growers
- Match light intensity to plant stage.
- Keep fixture height consistent across the canopy.
- Use DLI, not only wattage, when evaluating lighting strategy.
- Check real canopy PPFD with a PAR meter if possible.
- Combine strong lighting with proper climate, nutrients, irrigation, and airflow.
Spedizione. Consegna EU in 3 giorni
Da 7 a 15 EUR sotto i 30kg. Scopri di più sulla pagina Dettagli di spedizione.
Resi entro 60 giorni
Puoi ottenere un rimborso o una sostituzione entro 30 giorni dall'acquisto.
Ma di solito ci mettiamo dalla parte dei clienti, quindi possiamo concedere un termine di 60 giorni!
Supporto esperto post-vendita di 2 mesi
È gratuito.
Siamo un team di 10 persone con un decennio di saggia esperienza nella coltivazione e nel giardinaggio, quindi se avrai bisogno di aiuto, ti guideremo al tuo obiettivo entro 2 mesi dall'acquisto.
Chi siamo. La nostra storia di 9 anni
GoToGarden è nato nel 2017 da una frustrazione personale. Il nostro fondatore era un coltivatore amatoriale che passava ore a navigare in negozi online che sembravano costruiti da persone che non avevano mai toccato una pianta: layout disordinati, descrizioni vaghe dei prodotti, nessuna guida reale su cosa comprare o perché. Sapeva che doveva esserci un modo migliore.
Scopri di più sulla pagina Chi siamo
Dai un'occhiata agli altri calcolatori!
Stima nutrienti, illuminazione, VPD, irrigazione, spaziatura delle piante, pianificazione della coltivazione, ecc.